Where I Display My Kits
|
Last Updated on: Wednesday, November 23, 2022
|
Maiden Shelf
First shelf is installed and it is for all my Iron Maiden Eddie kits.
|
 
|
 
|
 
I
had to actually completely clear my model workbench, as that was the
only area large enough for me to assemble this shelf unit on.
|
|
Since there wasn't a whole lot of progression to this part of the room, here is how I built it.
 
I
had to actually completely clear my model workbench, as that was the
only area large enough for me to assemble this shelf unit on.
|
As you can see, this was designed to fit this specific spot in the
room. I knew a long time ago, this is where I wanted my Eddie kits.
I also knew I would have to be completely custom. So I started designing in my head a while ago.
I started putting it on paper almost as soon as I finished the room.
Then I pulled out some of the kits to get some measurements to really
nail down the design. Especially shelf heights and depths.
Once all that was settled, then I had to test fit pieces in the room to
see what needed modified. Like the uprights needing to be notched to
fit the heater vent, and the window stool. Also I needed to see how
much of the corner I needed to take off the deeper pieces to not block
the window.
Eventually, I am going to need to cut off the end of that top shelf. It
sticks out past the door trim, and will eventually be in the way of the
shelves going over there.
|
 |
|
BACK
|
| |
