Lexx

Lexx
from Hunk of Junk
UPDATED 06/27/15

Picked this up at WF2015.
Thanks to a very good friend of mine.

Now, normally I would give a nice overall shot with all the pieces all laid out for you to see.
Well, there was just too much in the box, and too many big pieces to do that with this kit.
Also, I didn't remove anything from their bags, as I didn't want to risk loosing anything.

The body and the 'eyes' account for most of the volume in the box.
And what exquisite parts they are.

Then you have all the smaller pieces. The nice details and such.
Each sealed in baggies so they don't get lost in the shuffle.

Now we get into the heart of the actual assembly.
The tail section.
The central support (above)
And the superstructure surrounding it (below)

For obvious reasons, these 2 parts are printed.
And while the process of attaching each piece to the center will be a bit painstaking, the results should be sweet.

There is so much going on with this kit, the instructions are on a CD. (complete with reference photos)

BACK